Prepare Compliance report. This task consists of four parts:
Identify three health and safety requirements of onsite
a) workers based on RIMS WHS management plan”?
b) Discuss with team members on the effectiveness of existing control measures
c) Recommended actions to minimise workplace incidents and mitigate risks
To do this, you will need to complete the following:
- Identify a minimum of 3 risks and/or hazards related to the project, ensuring that you consider multiple tasks that will need to be performed on-site
- Prioritise risks from those with the most impact to those with the least, using a qualitative method
- Select the three risks with the most impact, and prepare a risk register (with risk controls) to manage their impact
This assessment is to be no more than 750 – 850 words.
1.1 Evaluate construction site safety and identify potential risk areas.
1.2 Assess on site worker’s health and safety.
1.3 Identify hazards and
determine control measures that comply with legislative requirements and organisational policies.
1.4 Consult with workers to evaluate effectiveness of existing control measures and WHS experts, as necessary, to contribute to an inspection report.
1.5 Complete a workplace inspection report with recommended actions to minimise workplace incidents and mitigate risk.
Based on the report prepared from Assessment task 1 prepare Workplace safety plan. (750 - 850 words)
a) Identify the process used to mitigate the identified risks and hazard.
b) Suggest alternative plans
Prepare 5 power point slides and
a) make a presentation to the team to reinforce the safety processes.
During the presentation if there are issues identified then resolve them and revise the Workplace safety plan and submit.
2.1 Establish a workplace safety plan incorporating information from the workplace inspection report to raise safety awareness and support safe workplace practices.
2.2 Implement processes to identify hazards, rate the risks and put control measures in place.
2.3 Establish educational programs specific to the building and construction workplace to
ensure workers carry out safe work practices.
2.4 Negotiate and resolve safety issues and conflicts.
Based on the Workplace safety plan prepared from Assessment task 2 prepare Compliance report. (750 - 850 words)
Monitor the implementation process used to mitigate the
a) identified risks and hazard.
b) Note the deviations from the established practice.
c) Conduct a team meeting to discuss the findings.
Based on the discussion further revise the Compliance report and submit the changes.
3.1 Monitor and audit workplace safety to ensure compliance with WHS regulations and workplace safety requirements.
3.2 Record findings and recommend and implement actions to address non-compliance.
3.3 Review effectiveness of educational
programs to ensure all workers have been inducted and maintain safe work practices.
3.4 Monitor, review and document effectiveness of control measures to determine changes and improvements as required.
